Home > Dual Boot > Dual Boot Windows 7 And Xp Windows 7 Installed First

Dual Boot Windows 7 And Xp Windows 7 Installed First

Contents

Reply Johnny says: December 6, 2008 at 5:19 pmNot sure what all the fuss was about in some of your earlier posts, but you made this post easy to understand. Also, if getting blue screen, remember disabling SATA (choose IDE)I am now running my laptop from usb external hdd with windows 7 ultimate! too simple i have been donig it like this for many years and it eliminates all the dramas. Done! http://ezsolutionsoftware.com/dual-boot/how-to-dual-boot-windows-xp-and-windows-7-xp-installed-first.html

I've tried to unininstall/reinstall and have moved the adapter from port to another on the hub. Proffitt Forum moderator / September 13, 2009 9:39 PM PDT In reply to: Hi windows XP and Windows & on dual hard drives I did this.1. Posted On: 2010-03-06 . PLEASE HLPE Reply Michael says: October 24, 2009 at 7:02 pmGREAT THANKS!!!!!!!

Dual Boot Windows 7 And Xp Windows 7 Installed First

One evening i left in a hurry and closed the lid and hurriedly removed all usb devices. This way, the Virtual Memory paging isn’t working the same hard drive heads and data channels that the OS and software are, so when physical RAM gets used up and Virtual That issue has a hotfix.

May 31, 2011 unknown I have the blue screen too… Two option : 1. just follow the steps and make sure everything is good. Your drive already has been seen by the computer and your just putting it inside. Dual Boot Windows 7 And Xp Same Partition Does not laggggg at all!

Thanks a bunch David, I was really in a pickle. Dual Boot Windows 7 And Xp Separate Hard Drives by John.Wilkinson / April 27, 2010 1:12 AM PDT In reply to: Other way of dual booting XP and 7 (IDE and SATA Drives) 1.) You need not install XP on I have uploaded the cd drivers for 2 logitec wingman vibration feedback rumble packs with no problem. (cd's came with each rumble pack) (it's in the programs installed/uninstalled list of control I cannot read a flash drive and my usb connected card reader does not function.

Your step by step made the Job so much better!!Thank You!! Dual Boot Windows Xp And Windows 7 On Same Drive after it boots and loads windows 7 logo it hang up and blue screen shows. what will happen if I format the drive C:? *****previously, I use the command "bcdedit" remove the win7, so there was no boot management for dual os. I install the win-xp.

Dual Boot Windows 7 And Xp Separate Hard Drives

June 14, 2011 Someone I followed this procedure but now my disks are recognized as "Dynamic Disks" instead of primary and I don't know how to undo that June 20, 2011 Can always email me the zip file if you can. Dual Boot Windows 7 And Xp Windows 7 Installed First japentzApr 28, 2011, 12:21 AM Hello,Originally, I had XP on one drive. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Reply John Oliver says: May 23, 2008 at 4:02 pmExcellent article.

Good luck, Shane. navigate here The internal notebook's HDD is also IDE. I am running windows 8 on an x64 machine. Flag Permalink This was helpful (0) Collapse - Hi jaamja by mjswaim / October 9, 2010 10:19 AM PDT In reply to: Good morning mjswaim I understand. Dual Boot Windows 7 And Xp Easybcd

So now the data connects by SATA instead of IDE. Steve saysJuly 9, 2014 at 10:29 pm I just noticed that it says "external hard drive" specifically. Booted up perfectly Tony T saysNovember 27, 2011 at 2:50 am I would really like to get this to work. Check This Out I currently have the microsoft driver v 6. 0. 6001. 18000 dated 21/06/2006 installed Posted On: 2009-12-06 .

December 30, 2010 Saksham Easybcd rocks! Easybcd Windows Xp I'm also concerned one of the ports may be bad (SATA1) but I am unsure how to determine that. BOOTMGR is missing solved!You must be able to get into recovery.

However, if you do not install any of the Windows 7 updates, this will work [email protected] : the install.wim should be at this path: Windows Files/ Sources/ install.wim after you copied

It was so easy and now my son-in-law's computer works great. Flag Permalink This was helpful (1) Collapse - Re: cipying by Kees_B Forum moderator / October 7, 2010 5:11 PM PDT In reply to: Hi Kees As Bob said, only data There were no easy-to-use tools back then. Dual Boot Windows 7 And 10 Separate Hard Drives the drive is working properly.

In that case it's not usable for your purpose. This brings up a list of drives to boot from, ie HDD1, HDD2, SSD, DVD what ever, you select and computer boots to that drive - This DOES NOT change boot This brings up a list of drives to boot from, ie HDD1, HDD2, SSD, DVD what ever, you select and computer boots to that drive - This DOES NOT change boot this contact form PLEASE?!?

Install XP on one drive. I do have a suggestion though, could you add a few pics here and there so that we can see what you are talking about. Everything works fine, except that i always get a video hardware error when i move my mouse to get the display back after windows 7 has turned it off (after 10 i have windows xp so it is not showing up on my computer.

You state above that XP can't recognize the SATA drive. Thank you.